Ukulele Assembly Sequence

Join neck and sound box side piece.
Glue on side trim.
Glue on sound board TOP. Center line of neck and sound box must be in line.
Glue on fan bracing and sound hole braces
Glue on back trim and braces.
Glue on back piece. TOP of neck and top sound box must be in line.
Glue on fret board and bridge.

Parts of the Ukulele

parts1

parts2

First <<
< Prev
Next >
>> Last

Ukulele Assembly Sequence
Constructing the ‘Ukulele Neck
Shaping of the Neck and Tail Blocks
Layout and Bending of ‘Ukulele Sides and Lining
Gluing Up of Top and Back of ‘Ukulele
Sanding and Shaping of Ukulele Sound Board and Back
Installing Neck onto ‘Ukulele Body
Glue in Top Lining and Top Braces
Gluing on Sound Board of the ‘Ukulele
Gluing in of Bottom Lining and Back Bracing
Gluing on Back of ‘Ukulele
Finishing Ukulele Surface
Making of Fret Board and Ukulele Bridge
Drilling of Holes for Ukulele Tuning Keys
Final Finishing of Ukulele

This entry was posted on Saturday, March 21st, 2009 at 2:10 pm and is filed under Build-Make an Ukulele. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.